手机信号增强器. 数据表.

类别.

信号增强器.

名.

手机信号增强器.

Networks.

3G, 2100MHz.

类别

信号增强器.

手机信号增强器.

Networks

3G, 2100MHz.

手机信号增强器. 描述.

产品参考.

WAN4101333

插头.

对于电子产品或需要连接到电网的产品, 所有产品均随附与您订购的国家/地区相对应的适配器和插头. 如果您需要与交货国使用的适配器不同的适配器,请在订单注释中注明.

目前的价格.

此产品目前不可用.

描述.

请记住: 我们的团队目前正在翻译此信息. 您可以在接下来的几天中以您的语言查看所有这些详细信息. 有关其他准确信息,请参阅此内容的原始版本. 我们的团队以English语言提供此信息和详细信息. 如有疑问,误解或误读此信息的内容,请参阅本页的原始版本或联系我们的客户服务团队.
English [ EN ]
2100mhz signal booster 3G signal repeater.

dual band repeater gsm parameter data:

Model No.
Parameter data. Uplink. Downlink.
FrequencyRange. WCDMA. 1920-1980mhz. 2110-2170mhz.
Output Power. 20±2dBm. 20±2dBm.
Gain. 55±2dB. 60±2dB.
Bandwidth. 60M.
Ripple in Band. 5dB.
Spurious Emission. 9KHz~1GHz. -36 dBm.
1GHz~12.75GHz. -30 dBm.
VSWR. 3.
MTBF. Gt;50000 hours.
Power Supply. AC:100~240V, 50/ 60Hz;DC:12V 2A.
Power Consumption. Lt; 5W.
Impedance. 50 ohm.
Mechanical Specification.
RF Connector. N-Female N.
Dimensions (D*W*H). 100*45*18(mm).
Net weight. .35Kg.
Installation Type. Wall Installation.
Environment Conditions. IP40.
Humidity. Lt;90%.
Operating Temperature. 10°C~55°C.


Why we should buy mobile signal repeater/ signal booster/ 3G amplifier:

Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save somebody’s life.Unfortunately, there are still some places where one can find themselves “out of coverage”Usually those places are either too far from the cell phone base station or located inside underground constructions, for example:

- Parking lots, tunnels.
- Big stores, office buildings.
- Cars, boats etc.
- House in remote areas etc.

How is mobile phone signal repeater GSM/DCS/ 2G/3G/4G WORKING ?

- The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax).
- After the signal is accepted by the phone amplifier, the device amplifies it.
- Then this amplified signal goes through the connection cable (coax) to the inside antenna.
- And after that, the amplified signal transmits to the cell phone.

A regular repeater 3G consists of:

- 12dB outdoor antenna.
- 3dB indoor antenna.
- RG6-50 OHM indoor Coaxial Cable-5m.
- RG6-50 OHM outdoor Coaxial Cable-10m.
- Mounting accessories.
- AC power supply.
user manual

Whole Package Weight. 1.4KG.
Whole Package Size. 510x180x130mm(L x W x D).


Features of mobile phone signal amplifier:

- A. High-gain linear power amplifier.
- B. ALC and AGC function technology.
- C. Ultra-low noise receive amplifier.
- D. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters.
- E. Stable and reliable electromagnetic compatibility design.
- F. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications.
- G. With full-duplex communication mode.
- H. dispel the heat effective reasonable, the structure is pretty, the volume is suitable.

Signal repeater Installation diagram (very convenient and easy to install)

How should you install repeater (very easy and simple):

Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar).

Step 2: Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal.

Step 3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater.

Step 4: Mount your indoor antenna with signal repeater.

Step5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.

Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least.

Indoor and outdoor antenna must be separated by wall.

After- Sales Service

We have 12 months quality guarantee for all customers, you can return goods to us when receive defective repeater, but air freight charges should be responsible by buyer.

Signal problem & installation technique supporting

1.If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM.

2.If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well.

3.If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line.

4.Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover area.

Class rooms and small seminar halls.

Small Meeting rooms and board rooms.

Private offices.

Army authorities.

Police authorities.

Bus and vehicles.

VIP and privacy-sensitive scenarios’etc.

产品参考

WAN4101333

插头

对于电子产品或需要连接到电网的产品, 所有产品均随附与您订购的国家/地区相对应的适配器和插头. 如果您需要与交货国使用的适配器不同的适配器,请在订单注释中注明.

目前的价格

此产品目前不可用.

描述

请记住: 我们的团队目前正在翻译此信息. 您可以在接下来的几天中以您的语言查看所有这些详细信息. 有关其他准确信息,请参阅此内容的原始版本. 我们的团队以English语言提供此信息和详细信息. 如有疑问,误解或误读此信息的内容,请参阅本页的原始版本或联系我们的客户服务团队.
English [ EN ]
2100mhz signal booster 3G signal repeater.

dual band repeater gsm parameter data:

Model No.
Parameter data. Uplink. Downlink.
FrequencyRange. WCDMA. 1920-1980mhz. 2110-2170mhz.
Output Power. 20±2dBm. 20±2dBm.
Gain. 55±2dB. 60±2dB.
Bandwidth. 60M.
Ripple in Band. 5dB.
Spurious Emission. 9KHz~1GHz. -36 dBm.
1GHz~12.75GHz. -30 dBm.
VSWR. 3.
MTBF. Gt;50000 hours.
Power Supply. AC:100~240V, 50/ 60Hz;DC:12V 2A.
Power Consumption. Lt; 5W.
Impedance. 50 ohm.
Mechanical Specification.
RF Connector. N-Female N.
Dimensions (D*W*H). 100*45*18(mm).
Net weight. .35Kg.
Installation Type. Wall Installation.
Environment Conditions. IP40.
Humidity. Lt;90%.
Operating Temperature. 10°C~55°C.


Why we should buy mobile signal repeater/ signal booster/ 3G amplifier:

Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save somebody’s life.Unfortunately, there are still some places where one can find themselves “out of coverage”Usually those places are either too far from the cell phone base station or located inside underground constructions, for example:

- Parking lots, tunnels.
- Big stores, office buildings.
- Cars, boats etc.
- House in remote areas etc.

How is mobile phone signal repeater GSM/DCS/ 2G/3G/4G WORKING ?

- The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax).
- After the signal is accepted by the phone amplifier, the device amplifies it.
- Then this amplified signal goes through the connection cable (coax) to the inside antenna.
- And after that, the amplified signal transmits to the cell phone.

A regular repeater 3G consists of:

- 12dB outdoor antenna.
- 3dB indoor antenna.
- RG6-50 OHM indoor Coaxial Cable-5m.
- RG6-50 OHM outdoor Coaxial Cable-10m.
- Mounting accessories.
- AC power supply.
user manual

Whole Package Weight. 1.4KG.
Whole Package Size. 510x180x130mm(L x W x D).


Features of mobile phone signal amplifier:

- A. High-gain linear power amplifier.
- B. ALC and AGC function technology.
- C. Ultra-low noise receive amplifier.
- D. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters.
- E. Stable and reliable electromagnetic compatibility design.
- F. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications.
- G. With full-duplex communication mode.
- H. dispel the heat effective reasonable, the structure is pretty, the volume is suitable.

Signal repeater Installation diagram (very convenient and easy to install)

How should you install repeater (very easy and simple):

Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar).

Step 2: Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal.

Step 3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater.

Step 4: Mount your indoor antenna with signal repeater.

Step5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.

Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least.

Indoor and outdoor antenna must be separated by wall.

After- Sales Service

We have 12 months quality guarantee for all customers, you can return goods to us when receive defective repeater, but air freight charges should be responsible by buyer.

Signal problem & installation technique supporting

1.If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM.

2.If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well.

3.If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line.

4.Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover area.

Class rooms and small seminar halls.

Small Meeting rooms and board rooms.

Private offices.

Army authorities.

Police authorities.

Bus and vehicles.

VIP and privacy-sensitive scenarios’etc.

手机信号增强器. 法律通知.

请记住.

由专家、生产商或生产商提供并提及的产品特征和细节,或在官方网站上发布. 除非另有明确规定,否则在任何情况下均不得视为我们团队的评估.
我们建议您查阅我们的客户和用户发布的评论,评论,意见和评级,以扩展和/或对比这些信息.

解释错误.

我们的团队以ENGLISH语言提供此信息和详细信息.
如果您使用其他语言进行浏览,请记住所提供的信息可能是通过我们团队未监督的实时自动过程从原始语言翻译而来的。.
如有疑问,误解或误读此信息的内容,请参阅本页的原始版本或联系我们的客户服务团队.

产品图片.

产品图像仅用于图形目的.

产品颜色.

产品图片仅用于图形目的,因此可能与待售产品的实际颜色,特征或其他细节不完全一致.

出生国家.

Made in Hong Kong / 在制作 Hong Kong

建议.

我们建议您参考您所在国家/地区有关«手机信号增强器»的符合性声明,标准和使用的适用法规.

请记住

由专家、生产商或生产商提供并提及的产品特征和细节,或在官方网站上发布. 除非另有明确规定,否则在任何情况下均不得视为我们团队的评估.
我们建议您查阅我们的客户和用户发布的评论,评论,意见和评级,以扩展和/或对比这些信息.

解释错误

我们的团队以ENGLISH语言提供此信息和详细信息.
如果您使用其他语言进行浏览,请记住所提供的信息可能是通过我们团队未监督的实时自动过程从原始语言翻译而来的。.
如有疑问,误解或误读此信息的内容,请参阅本页的原始版本或联系我们的客户服务团队.

产品图片

产品图像仅用于图形目的.

产品颜色

产品图片仅用于图形目的,因此可能与待售产品的实际颜色,特征或其他细节不完全一致.

出生国家

Made in Hong Kong / 在制作 Hong Kong

建议

我们建议您参考您所在国家/地区有关«手机信号增强器»的符合性声明,标准和使用的适用法规.

到目前为止没有客户评级. 成为第一个发布评级的人!

手机信号增强器.

其他信息.

对于电子产品或需要连接到电网的产品, 所有产品均随附与您订购的国家/地区相对应的适配器和插头. 如果您需要与交货国使用的适配器不同的适配器,请在订单注释中注明. «手机信号增强器»暂时无法在spyfactor.com上出售.

由专家、生产商或生产商提供并提及的产品特征和细节,或在官方网站上发布. 除非另有明确规定,否则在任何情况下均不得视为我们团队的评估. 我们建议您查阅我们的客户和用户发布的评论,评论,意见和评级,以扩展和/或对比这些信息. Made in Hong Kong / 在制作 Hong Kong. 我们建议您参考您所在国家/地区有关«手机信号增强器»的符合性声明,标准和使用的适用法规.

数据表.
手机信号增强器.

信号增强器. 手机信号增强器. 3G..
Networks.

3G, 2100MHz.

类别.

信号增强器.

名.

手机信号增强器.

产品参考.

WAN4101333

目前的价格.

此产品目前不可用.

请记住.

由专家、生产商或生产商提供并提及的产品特征和细节,或在官方网站上发布. 除非另有明确规定,否则在任何情况下均不得视为我们团队的评估.
我们建议您查阅我们的客户和用户发布的评论,评论,意见和评级,以扩展和/或对比这些信息.

解释错误.

我们的团队以ENGLISH语言提供此信息和详细信息.
如果您使用其他语言进行浏览,请记住所提供的信息可能是通过我们团队未监督的实时自动过程从原始语言翻译而来的。.
如有疑问,误解或误读此信息的内容,请参阅本页的原始版本或联系我们的客户服务团队.

产品图片.

产品图像仅用于图形目的.

产品颜色.

产品图片仅用于图形目的,因此可能与待售产品的实际颜色,特征或其他细节不完全一致.

描述.

请记住: 我们的团队目前正在翻译此信息. 您可以在接下来的几天中以您的语言查看所有这些详细信息. 有关其他准确信息,请参阅此内容的原始版本. 我们的团队以English语言提供此信息和详细信息. 如有疑问,误解或误读此信息的内容,请参阅本页的原始版本或联系我们的客户服务团队.
English [ EN ]
2100mhz signal booster 3G signal repeater.

dual band repeater gsm parameter data:

Model No.
Parameter data. Uplink. Downlink.
FrequencyRange. WCDMA. 1920-1980mhz. 2110-2170mhz.
Output Power. 20±2dBm. 20±2dBm.
Gain. 55±2dB. 60±2dB.
Bandwidth. 60M.
Ripple in Band. 5dB.
Spurious Emission. 9KHz~1GHz. -36 dBm.
1GHz~12.75GHz. -30 dBm.
VSWR. 3.
MTBF. Gt;50000 hours.
Power Supply. AC:100~240V, 50/ 60Hz;DC:12V 2A.
Power Consumption. Lt; 5W.
Impedance. 50 ohm.
Mechanical Specification.
RF Connector. N-Female N.
Dimensions (D*W*H). 100*45*18(mm).
Net weight. .35Kg.
Installation Type. Wall Installation.
Environment Conditions. IP40.
Humidity. Lt;90%.
Operating Temperature. 10°C~55°C.


Why we should buy mobile signal repeater/ signal booster/ 3G amplifier:

Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save somebody’s life.Unfortunately, there are still some places where one can find themselves “out of coverage”Usually those places are either too far from the cell phone base station or located inside underground constructions, for example:

- Parking lots, tunnels.
- Big stores, office buildings.
- Cars, boats etc.
- House in remote areas etc.

How is mobile phone signal repeater GSM/DCS/ 2G/3G/4G WORKING ?

- The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax).
- After the signal is accepted by the phone amplifier, the device amplifies it.
- Then this amplified signal goes through the connection cable (coax) to the inside antenna.
- And after that, the amplified signal transmits to the cell phone.

A regular repeater 3G consists of:

- 12dB outdoor antenna.
- 3dB indoor antenna.
- RG6-50 OHM indoor Coaxial Cable-5m.
- RG6-50 OHM outdoor Coaxial Cable-10m.
- Mounting accessories.
- AC power supply.
user manual

Whole Package Weight. 1.4KG.
Whole Package Size. 510x180x130mm(L x W x D).


Features of mobile phone signal amplifier:

- A. High-gain linear power amplifier.
- B. ALC and AGC function technology.
- C. Ultra-low noise receive amplifier.
- D. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters.
- E. Stable and reliable electromagnetic compatibility design.
- F. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications.
- G. With full-duplex communication mode.
- H. dispel the heat effective reasonable, the structure is pretty, the volume is suitable.

Signal repeater Installation diagram (very convenient and easy to install)

How should you install repeater (very easy and simple):

Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar).

Step 2: Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal.

Step 3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater.

Step 4: Mount your indoor antenna with signal repeater.

Step5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.

Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least.

Indoor and outdoor antenna must be separated by wall.

After- Sales Service

We have 12 months quality guarantee for all customers, you can return goods to us when receive defective repeater, but air freight charges should be responsible by buyer.

Signal problem & installation technique supporting

1.If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM.

2.If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well.

3.If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line.

4.Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover area.

Class rooms and small seminar halls.

Small Meeting rooms and board rooms.

Private offices.

Army authorities.

Police authorities.

Bus and vehicles.

VIP and privacy-sensitive scenarios’etc.

插头.

对于电子产品或需要连接到电网的产品, 所有产品均随附与您订购的国家/地区相对应的适配器和插头. 如果您需要与交货国使用的适配器不同的适配器,请在订单注释中注明.

建议.

我们建议您参考您所在国家/地区有关«手机信号增强器»的符合性声明,标准和使用的适用法规.

出生国家.

Made in Hong Kong / 在制作 Hong Kong

Networks

3G, 2100MHz.

类别

信号增强器.

手机信号增强器.

产品参考

WAN4101333

目前的价格

此产品目前不可用.

请记住

由专家、生产商或生产商提供并提及的产品特征和细节,或在官方网站上发布. 除非另有明确规定,否则在任何情况下均不得视为我们团队的评估.
我们建议您查阅我们的客户和用户发布的评论,评论,意见和评级,以扩展和/或对比这些信息.

解释错误

我们的团队以ENGLISH语言提供此信息和详细信息.
如果您使用其他语言进行浏览,请记住所提供的信息可能是通过我们团队未监督的实时自动过程从原始语言翻译而来的。.
如有疑问,误解或误读此信息的内容,请参阅本页的原始版本或联系我们的客户服务团队.

产品图片

产品图像仅用于图形目的.

产品颜色

产品图片仅用于图形目的,因此可能与待售产品的实际颜色,特征或其他细节不完全一致.

描述

请记住: 我们的团队目前正在翻译此信息. 您可以在接下来的几天中以您的语言查看所有这些详细信息. 有关其他准确信息,请参阅此内容的原始版本. 我们的团队以English语言提供此信息和详细信息. 如有疑问,误解或误读此信息的内容,请参阅本页的原始版本或联系我们的客户服务团队.
English [ EN ]
2100mhz signal booster 3G signal repeater.

dual band repeater gsm parameter data:

Model No.
Parameter data. Uplink. Downlink.
FrequencyRange. WCDMA. 1920-1980mhz. 2110-2170mhz.
Output Power. 20±2dBm. 20±2dBm.
Gain. 55±2dB. 60±2dB.
Bandwidth. 60M.
Ripple in Band. 5dB.
Spurious Emission. 9KHz~1GHz. -36 dBm.
1GHz~12.75GHz. -30 dBm.
VSWR. 3.
MTBF. Gt;50000 hours.
Power Supply. AC:100~240V, 50/ 60Hz;DC:12V 2A.
Power Consumption. Lt; 5W.
Impedance. 50 ohm.
Mechanical Specification.
RF Connector. N-Female N.
Dimensions (D*W*H). 100*45*18(mm).
Net weight. .35Kg.
Installation Type. Wall Installation.
Environment Conditions. IP40.
Humidity. Lt;90%.
Operating Temperature. 10°C~55°C.


Why we should buy mobile signal repeater/ signal booster/ 3G amplifier:

Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save somebody’s life.Unfortunately, there are still some places where one can find themselves “out of coverage”Usually those places are either too far from the cell phone base station or located inside underground constructions, for example:

- Parking lots, tunnels.
- Big stores, office buildings.
- Cars, boats etc.
- House in remote areas etc.

How is mobile phone signal repeater GSM/DCS/ 2G/3G/4G WORKING ?

- The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax).
- After the signal is accepted by the phone amplifier, the device amplifies it.
- Then this amplified signal goes through the connection cable (coax) to the inside antenna.
- And after that, the amplified signal transmits to the cell phone.

A regular repeater 3G consists of:

- 12dB outdoor antenna.
- 3dB indoor antenna.
- RG6-50 OHM indoor Coaxial Cable-5m.
- RG6-50 OHM outdoor Coaxial Cable-10m.
- Mounting accessories.
- AC power supply.
user manual

Whole Package Weight. 1.4KG.
Whole Package Size. 510x180x130mm(L x W x D).


Features of mobile phone signal amplifier:

- A. High-gain linear power amplifier.
- B. ALC and AGC function technology.
- C. Ultra-low noise receive amplifier.
- D. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters.
- E. Stable and reliable electromagnetic compatibility design.
- F. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications.
- G. With full-duplex communication mode.
- H. dispel the heat effective reasonable, the structure is pretty, the volume is suitable.

Signal repeater Installation diagram (very convenient and easy to install)

How should you install repeater (very easy and simple):

Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar).

Step 2: Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal.

Step 3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater.

Step 4: Mount your indoor antenna with signal repeater.

Step5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.

Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least.

Indoor and outdoor antenna must be separated by wall.

After- Sales Service

We have 12 months quality guarantee for all customers, you can return goods to us when receive defective repeater, but air freight charges should be responsible by buyer.

Signal problem & installation technique supporting

1.If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM.

2.If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well.

3.If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line.

4.Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover area.

Class rooms and small seminar halls.

Small Meeting rooms and board rooms.

Private offices.

Army authorities.

Police authorities.

Bus and vehicles.

VIP and privacy-sensitive scenarios’etc.

插头

对于电子产品或需要连接到电网的产品, 所有产品均随附与您订购的国家/地区相对应的适配器和插头. 如果您需要与交货国使用的适配器不同的适配器,请在订单注释中注明.

建议

我们建议您参考您所在国家/地区有关«手机信号增强器»的符合性声明,标准和使用的适用法规.

出生国家

Made in Hong Kong / 在制作 Hong Kong

选项
联系
结帐
回到顶部